The High-Security Razor Wire Mesh Fencing System, combining Razor Mesh Panel and Razor Wire Coil Tops, provides a formidable barrier against unauthorized access. This system enhances perimeter security by merging the robustness of a mesh panel with the cutting deterrence of razor wire, making it a reliable choice for safeguarding high-risk areas while presenting a robust facade to deter potential intruders.

1050 mm Dia / 56 turns/ 2.5 mm core wire concertina, supplied with Posts and Y Arms Support, used with a variety of mesh panels ( chain link mesh, welded wire mesh, welded razor mesh) for high security fencing applications

Details:

Coil Diameter:1050 mm
Core wire Diameter: Min 2.5 mm
Material of Core wire:Hot Dipped GI (min 275 gsm)
Material of Strip: Hot Dipped GI (min 275 gsm)
Material:Hot Dipped GI (min 275 gsm)
Weight:15.2 ± 5%
Length when stretched:10-12 m
Number of turns / loops:56.
Blade profile: Tear Blade

Tear Blade profile

Blade Length: Minimum 22mm
Tear Blade Thickness: Minimum Thickness of 0.5mm
Material Hot Dipped GI (min 275 gsm)

Supplied with Fence Post

Type: Circular / Round Hollow
Material: MS steel Tube (IS 1161).
Dimensions:76mm Dia, 3.2 mm ( +/- 10%) Thickness.
Length:3345mm (+/- 5%) (2745 mm above ground level + 600 mm under the ground level).
Zinc Powder Coating: Hot Dip galvanized to minimum 350 GSM as per IS 2629/ IS 4759/ASTM A 123
Holes: Suitable holes of proper size to match the mounting of the clamps to be provided.

Clamps:

To tighten the mesh panel along the post with GI strip 50 x 5 x 2700mm with 9 holes will be provided. Along with the clamp 9no of Mushroom Head Bolt (M8X120) with breakable head safety nut and washer (Material: SS 304, OD : 15.89mm, ID : 8.38mm, thickness ; 2.04mm.)will be provided.
Coating: Hot dip galvanized.

Y-Arm

MS Angle Size: 50x50x5 mm.
Length 750 mm of one arm.
Coating: Hot dip galvanized to 350 GSM Hot Dip Galvanizing as per IS 2629 / IS 4759 /ASTM A 123
Outer diameter: 63 mm of sleeve cap, Bolted on the top of the fence post. Straining post will be installed at every 30 meters.
Accessories for fitting Y Arm: Mushroom Head Bolt with breakable head safety nut (M8X120) (2 Nos per post)
Material: MS, IS 2062, galvanized

Fitting: Anchor Rod 10 mm dia 300 mm long GI Rod tie with fence post at bottom using tie wire.